Welcome to Shandong Changfa Steel
PRODUCT CENTER
CONTACT US
If you are interested in cooperation, please contact us immediately, we will give you feedback as soon as possible!
Mobile
5754 aluminum alloy is a typical al-Mg alloy with moderate strength, good corrosion resistance, weldability and easy to be formed.
In foreign countries, 5754 aluminum alloy sheet with different heat treatment status is the main material used in automobile manufacturing industry (car doors, molds, seals) and can industry.
In foreign countries, 5754 aluminum alloy sheet with different heat treatment status is the main material used in automobile manufacturing industry (car doors, molds, seals) and can industry.
5052 aluminum sheets belong to Al-Mg aluminum alloy, where magnesium is the main element inside.
This kind of alloy is the most extensively used anti-rust aluminum and it has high strength, extraordinary fatigue resistance, excellent plasticity and corrosion resistance; it is non-heat treatable: it has high plasticity at annealed condition, good plasticity when semi-cold hardening, while low plasticity during cold hardening.
It can be polished and has good corrosion resistance, excellent weldability, but poor machinability.
5052 aluminum sheets have been certified by ASTM B209 and our production are all conducted according to international standards.
This kind of alloy is the most extensively used anti-rust aluminum and it has high strength, extraordinary fatigue resistance, excellent plasticity and corrosion resistance; it is non-heat treatable: it has high plasticity at annealed condition, good plasticity when semi-cold hardening, while low plasticity during cold hardening.
It can be polished and has good corrosion resistance, excellent weldability, but poor machinability.
5052 aluminum sheets have been certified by ASTM B209 and our production are all conducted according to international standards.
The main alloying elements in 6061 alloy are magnesium and silicon, which have moderate strength, good corrosion resistance, weldability and good oxidation effect.
Widely used in various industrial structural parts requiring a certain strength and high antibiotic corrosion, its main chemical composition: Cu:0.15-0.4; Si: 0.4-0.8; Fe: 0.7 -; Mn: 0.15; Mg: 0.8-1.2; Zinc: 0.25; Cr: 0.04-0.35; Ti: 0.15 -; 6061 aluminum plate its state T6 and T651 difference is that in general, T6 internal stress will be relatively large, processing will be deformed, the most suitable for processing state should be T651, he is on the basis of T6 tensile, eliminate internal stress.
Widely used in various industrial structural parts requiring a certain strength and high antibiotic corrosion, its main chemical composition: Cu:0.15-0.4; Si: 0.4-0.8; Fe: 0.7 -; Mn: 0.15; Mg: 0.8-1.2; Zinc: 0.25; Cr: 0.04-0.35; Ti: 0.15 -; 6061 aluminum plate its state T6 and T651 difference is that in general, T6 internal stress will be relatively large, processing will be deformed, the most suitable for processing state should be T651, he is on the basis of T6 tensile, eliminate internal stress.
Al-cu-mg-zn alloy, which is made by adding Zn on the basis of duralumin.
This kind of alloy is currently the highest strength of aluminum alloy, higher than other aluminum alloy strength, so called super hard aluminum.
Disadvantage is also very poor corrosion resistance, can improve the artificial aging temperature or aluminum.
Super hard aluminum alloy with "aluminum chao" Chinese pinyin prefix "LC" plus serial number. Such as LC4, LC6, etc., are mostly used to manufacture important components with large stress, such as aircraft girders.
This kind of alloy is currently the highest strength of aluminum alloy, higher than other aluminum alloy strength, so called super hard aluminum.
Disadvantage is also very poor corrosion resistance, can improve the artificial aging temperature or aluminum.
Super hard aluminum alloy with "aluminum chao" Chinese pinyin prefix "LC" plus serial number. Such as LC4, LC6, etc., are mostly used to manufacture important components with large stress, such as aircraft girders.
The mechanical properties of 2024-T3 aluminum alloy can be significantly improved after heat treatment.
2024 is a typical duralumin alloy in the aluminum-copper-magnesium system.
It is a heat-treatable alloy with high strength, easy to work, easy to turn, and moderate corrosion resistance.
Main applications: aircraft structure, rivets, truck wheels, propeller components and other structural parts.
2024 is a typical duralumin alloy in the aluminum-copper-magnesium system.
It is a heat-treatable alloy with high strength, easy to work, easy to turn, and moderate corrosion resistance.
Main applications: aircraft structure, rivets, truck wheels, propeller components and other structural parts.
6063 aluminum alloy material. The main alloy elements are magnesium and silicon, with excellent machining performance, excellent weldability, extrusion and electroplating, good corrosion resistance, toughness, easy to polish, color film, excellent anodic oxidation effect, is a typical extrusion alloy.
6063 aluminum alloy profile with its good plasticity, moderate heat treatment strength, good welding performance and anodic oxidation treatment, gorgeous surface color and many other advantages, is widely used in building profiles, irrigation pipes, for vehicles, platforms, furniture, elevators, fences and other tubes, bars, profiles.
6063 aluminum alloy profile with its good plasticity, moderate heat treatment strength, good welding performance and anodic oxidation treatment, gorgeous surface color and many other advantages, is widely used in building profiles, irrigation pipes, for vehicles, platforms, furniture, elevators, fences and other tubes, bars, profiles.
1060 aluminum plate is widely used in products with low strength requirements.
Products are often used in signs billboards, building exterior decoration, bus body, tall buildings and factory wall body adornment, kitchen sink, lamp holder, fan blade, electronic parts, chemical equipment, mechanical parts, deep drawing of sheet or spinning concave ware, welding part, heat exchanger, clock surface and plate, plate, kitchenware, ornaments, reflective equipment, etc.
Products are often used in signs billboards, building exterior decoration, bus body, tall buildings and factory wall body adornment, kitchen sink, lamp holder, fan blade, electronic parts, chemical equipment, mechanical parts, deep drawing of sheet or spinning concave ware, welding part, heat exchanger, clock surface and plate, plate, kitchenware, ornaments, reflective equipment, etc.
6082 is a heat-treatable alloy with good formability, weldability, machinability and corrosion resistance.
It also has moderate strength and can maintain good operability after annealing.
It is mainly used in mechanical structure, including bars, plates, pipes and profiles.
It also has moderate strength and can maintain good operability after annealing.
It is mainly used in mechanical structure, including bars, plates, pipes and profiles.
7075 aluminum alloy is a cold - treated forging alloy, high strength, far better than mild steel.
7075 is one of the strongest alloys commercially available. Under heat treatment, can achieve very high strength characteristics.
7075 materials are generally added a small amount of copper, chromium and other alloys, the department of 7075-T651 aluminum alloy is particularly top grade, known as the best aluminum alloy products, high strength, far better than any mild steel.
The alloy also has good mechanical properties and anode reaction.
7075 is one of the strongest alloys commercially available. Under heat treatment, can achieve very high strength characteristics.
7075 materials are generally added a small amount of copper, chromium and other alloys, the department of 7075-T651 aluminum alloy is particularly top grade, known as the best aluminum alloy products, high strength, far better than any mild steel.
The alloy also has good mechanical properties and anode reaction.
6082-T6 aluminum, the main alloying elements in the alloy are magnesium and silicon, with excellent processing performance, excellent weldability, extrusion and electroplating, good corrosion resistance, toughness, easy to polish, coating, excellent anodic oxidation effect, is a typical extrusion alloy.
Widely used in building profiles, irrigation pipes, pipes, bars and profiles for vehicles, platforms, furniture, elevators and fences.
Widely used in building profiles, irrigation pipes, pipes, bars and profiles for vehicles, platforms, furniture, elevators and fences.
A finished Aluminium product such as strip which has been wound or coiled after rolling.
These Aluminium Strips are available in Al 99.5 and E-Al 99.7 pure aluminium 1050, 1060, 1070, 1100, 1145, 1200, 1350, 2024, 3003, 3004, 3005, 3104, 5005, 5050, 5052, 5056, 5182, 5252, 5657, 5754, 6061, 7075, 8006, 8011, 8079, 9020.
Re-rolled aluminum strip available in a wide range of precise thickness and width capabilities for consistent and tight gauge tolerances.
These Aluminium Strips are available in Al 99.5 and E-Al 99.7 pure aluminium 1050, 1060, 1070, 1100, 1145, 1200, 1350, 2024, 3003, 3004, 3005, 3104, 5005, 5050, 5052, 5056, 5182, 5252, 5657, 5754, 6061, 7075, 8006, 8011, 8079, 9020.
Re-rolled aluminum strip available in a wide range of precise thickness and width capabilities for consistent and tight gauge tolerances.
Al metal alloy: 1000, 2000, 3000, 4000, 5000, 6000, 7000, 8000 series etc
Alu temper: O - H112, T3 - T8, T351 - T851 etc
Thickness: 0.3mm - 6mm
Width: 900mm - 1600mm
Alu temper: O - H112, T3 - T8, T351 - T851 etc
Thickness: 0.3mm - 6mm
Width: 900mm - 1600mm
CONTACT US
Address: Liaocheng Economic and Technological Development Zone, Shandong Province
