Welcome to Shandong Changfa Steel
PRODUCT CENTER
CONTACT US
If you are interested in cooperation, please contact us immediately, we will give you feedback as soon as possible!
Mobile
SPCE is suitable for deep drawing grade steel.Cold rolled steel is our most common and commonly used cold rolled products.Its brand can be generally divided into: SPCC, SPCD, SPCE.
SPCE is suitable for deep drawing grade steel.
1020 belongs to high-quality carbon structural steel. Its strength is slightly higher than 1015 steel. It has good toughness, plasticity and weldability. It is rarely quenched and has no temper brittleness. Parts with high cold deformation plasticity, generally used for bending, calendering, edge bending and hammer arch processing, good welding performance of electric arc welding and contact welding, small thickness during gas welding, strict shape requirements or complex shapes are prone to cracks. Machinability cold drawing or normalizing state is better than annealing state, and is often used to manufacture various mechanical parts with low stress and high toughness requirements.
Performance and application of material ST37: the material has good performance, that is, through cold rolling, it can obtain cold rolled strip and steel plate with thinner thickness and higher precision, with high straightness, high surface finish, clean and bright surface of cold rolled plate in Taiwan Strait, easy to be coated, various varieties, wide application, high stamping performance, non aging, and low yield point.
Due to moderate carbon content and good comprehensive properties, the strength, plasticity, welding and other properties are well matched, which is the most widely used. SS400 steel plate is applicable to bridges, ships and vehicles.SS400 is often rolled into wire rod or round steel, square steel, flat steel, angle steel, I-beam, channel steel, window frame steel and other section steel, medium thick steel plate. It is widely used in buildings and engineering structures. It is used for making steel bars or building workshop frames, high-voltage transmission towers, bridges, vehicles, boilers, containers, ships, etc., and is also widely used as mechanical parts with low performance requirements; C. Grade D steel can also be used as some professional steel.
S235JR is a European standard non alloy structural steel, which is equivalent to the national standard Q235B, that is, carbon structural steel with low carbon content. It is widely used for welding, bolting and riveting structures. It can also be used for building, bridge, ship, vehicle structural parts, manufacturing various tools, cutting tools, molds and measuring tools.
1. Width: 600-1000 mm 2. Thickness: 0.135-2.0 mm 3. Hardness: T2, T2.5, T3, T4, T5, T6, T7, DR8, DR9 4. Standard: AISI, ASTM, BS, DIN, GB, JIS 5. Grade: SGCC, SGCH, SGCE, SPCG, DX51D, 6. Technique: cold rolled 7. Coil weight: about 5--12 tons 8. Coil diameter: 508-1500 mm or as per customer's request
The surface of theGalvalume Coil is a unique smooth, flat and gorgeous star, and the basic color is silver white. The special coating structure makes it have excellent corrosion resistance. The normal service life of the Galvalume Coil can reach 25a, and the heat resistance is very good, which can be used in the high temperature environment of 315 ℃; The coating has good adhesion with the paint film, has good processing performance, and can be punched, sheared, welded, etc; The surface conductivity is very good.
SPCC is commonly used cold rolled carbon steel sheet and steel strip.Cold coil is made of hot rolled coil at room temperature and below the recrystallization temperature, including plate and coil, of which the sheet delivered is called steel plate, also known as box plate or plate; the long length and delivered in coil is called steel strip, also known as coil plate.
Cold rolled Non-Oriented silicon steel
Non oriented fully processed steels are iron-silicon alloys with varying silicon contents and have similar magnetic properties in all directions in the plan of the sheet. They are principally used for motors, generators, alternators, ballasts, small transformers and a variety of other electromagnetic applications.
Silicon steel is a kind of ferrosilicon soft magnetic alloy with extremely low carbon content. Generally, the silicon content is 0.5% ~ 4.5%.
Cold Rolled Silicon Transformer Steel
Electrical steel mainly consists of grain-oriented electrical steel and non-oriented electrical steel. Grain-oriented electrical steel widely used in transformer industry. Non-oriented electrical steel widely used in motor industry.
Transformer Grain Cold Rolled Non Grain Oriented Silicon Steel
We can offer different sizes silicon steel sheet and we can offer you different shapes as core and sheet. It is widely used in shielding installation area because its cheaper price.
CONTACT US
Address: Liaocheng Economic and Technological Development Zone, Shandong Province
