Welcome to Shandong Changfa Steel
PRODUCT CENTER
CONTACT US
If you are interested in cooperation, please contact us immediately, we will give you feedback as soon as possible!
Mobile
The 4130 carbon steel plate is usually used in the quenched and tempered state. When the carbon content is at the lower limit, the steel can also be used as the carburized steel with higher central strength.
NM400 wear-resistant carbon steel plate is widely used in mining machinery, coal mining machinery, environmental protection machinery, engineering machinery, etc. It is also commonly used as high-strength structural steel with yield strength ≥ 800MPa.
1. Power industry -- fan blades, burner pipelines, feeder and hopper lining, crusher parts, coal grinder parts, ash pipes, air
handling systems and conveyors;
2. Have spentIron and steel industry - hopper lining, grille, feeder and base, dump truck, hopper, pipe, pump shell, crusher
parts, slag trough, various chassis, vibrating screen;
Galvanized sheet G550 belongs to high-strength series galvanized sheet, with high requirements for tensile strength and yield strength. Its minimum yield strength is 560Mpa, minimum tensile strength is 650Mpa, and zinc layer thickness is 275g/m2. It has strong corrosion resistance and is mainly used for building structures with high strength requirements, such as Z-shaped steel, C-shaped steel, floor bearing plate, etc.
DX51D Galvanized steel sheet has low melting point, good fluidity, easy plastic processing and welding, and is resistant to atmospheric corrosion.
Q195 galvanized sheet is a surface galvanized sheet with yield strength of 195MPa.
The construction industry is mainly used to manufacture anti-corrosion roof panels and roof gratings for industrial and civil buildings; In light industry, it is used to manufacture household appliance shells, civil chimneys, kitchen appliances, etc. In automobile industry, it is mainly used to manufacture corrosion resistant parts of cars, etc; Agriculture, animal husbandry and fishery are mainly used as food storage and transportation, frozen processing tools for meat and aquatic products, etc; It is mainly used for the storage and transportation of materials and packaging tools.
Stainless steel is an alloy of Iron with a minimum of 10.5% Chromium. Chromium produces a thin layer of oxide on the surface of the steel known as the passive layer. This prevents any further corrosion of the surface. Increasing the amount of Chromium gives an increased resistance to corrosion.
Use of 2205 stainless steel plate:
1. The heater is generally used in the oil refining unit;
2. Chemical plant equipment pipeline;
3. Fast cooling cylinder for solid solution used in textile industry;
4. Seamless steel pipe for heat exchanger and condenser.
5. High pressure seamless steel pipe for food (gb-2000) is a high-quality carbon structural steel and alloy steel seamless steel pipe suitable for chemical equipment and pipes with working temperature of - 40~400 ° C and working pressure of 10~30ma.
6. Seamless steel pipes for geological drilling and oil drilling control.
7. Cracking pipe for petrochemical industry is used to transport high-temperature and high-pressure fluid on fertilizer equipment.
201 stainless steel is mainly used for decorative tubes, industrial tubes and some shallow stretched products. Such as: oil waste gas combustion pipeline; Engine exhaust pipe; Boiler shell, heat exchanger and heating furnace components; Silencing parts for diesel engine; Boiler pressure vessel; Chemical transport vehicle; Expansion joint; Spiral welded pipe for gas furnace pipe and dryer, etc.
430 stainless steel is used for building decoration, fuel burner parts, household appliances and household appliances. 430F is a steel with free cutting property added to 430 steel, mainly used for automatic lathes, bolts and nuts. 430LX adds Ti or Nb to 430 steel to reduce the content of C, which improves the processability and welding performance. It is mainly used in hot water tanks, hot water supply systems, sanitary appliances, household durable appliances, bicycle flywheels, etc.
310s stainless steel plate is widely used in kiln, high-temperature furnace, boiler, furnace liner high-temperature equipment, such as kiln car, boiler liner, high-temperature furnace, high-temperature furnace tube, combustion machine liner, etc. It can be used for high-temperature equipment. The product is resistant to high temperature and heat. 310s stainless steel plate has good creep strength and can work continuously under high temperature. The working temperature of 310S stainless steel is 1200 ℃, and it can work continuously at 1100 ℃. It is mainly used to manufacture high temperature exhaust pipe, high temperature furnace, high temperature furnace liner, crematory furnace and other steel grades requiring heat resistance, as well as high temperature and high temperature contact parts.
CONTACT US
Address: Liaocheng Economic and Technological Development Zone, Shandong Province
